Coremo Air Applied Caliper Brakes - E
Industrial Clutch Parts Ltd. supplies a complete range of Coremo air applied caliper brakes. Used in a variety of industrial applications where air pressure is needed to generate a braking force.
Coremo E is an air-applied pneumatic caliper brake. Available in two standard sizes. The brake is suitable for applications where continuous braking or service stops are required.
- Braking Force: 20,180 - 36,600 N
- Disc Thickness: 25.4 & 40 mm
- Interchangeability: Twiflex, Wichita
OEM Cross Reference Table
| Manufacturer | OEM Part Number |
|---|---|
| Twiflex | GMR-P |
| Wichita Clutch | CPS-E 20.2 |
| Wichita Clutch | CPS-E 36.6 |
Coremo Air Applied Caliper Brakes - E
Coremo E is an air applied caliper brake best suited for industrial applications where continuous braking or service stops are required.
Coremo E pneumatic caliper brakes generate a clamping force depending on the pressure of air supplied. The input air pressure must not exceed 6 bar. The brake can be installed in any position since it has a lever balancing and lining pad alignment system. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.
| Model | Code | Braking Force (N) | Max.Pressure (bar) |
| E3 | A1955 | 20180 | 6 |
| A1949 | |||
| E5 | A1940 | 36600 | 6 |
| A1934 |
