ICP Electromagnetic Power Off Safety Brake - POS Series

Brand: ICP
Code: POS

Electromagnetic power-off safety brakes engage when the electrical power supply is off. Power-off electric safety brakes can be used as a holding or parking brake to safely stop and hold rotating shafts even if power is cut off.

POS series is available in nine standard sizes. The design causes the spring coil to hold the brake piece in place and creating braking torque through its friction. Steady torque levels are generated for fast control loads even in testing conditions.

  • Static torque: 4.0 - 480 Nm
  • Voltage: 24, 90, 190 VDC
  • Power: 20 - 110 (W) @ 20°C
Out of stock

For further information, please contact us at:

ICP Electromagnetic Power Off Safety with Manual Release - POS Series 

Product Specific Information

Please enter any product specific information to enable our engineers to specify the correct product or product for you.

Product Brake
Brand ICP
Actuation Method Electric
Brake Type Power Off
Torque Rating 4.0 - 480 Nm
Voltage 24V