Coremo Spring Applied Hydraulic Caliper Brake G2N-ID

Brand: Coremo
Code: A2886 & A2890

Industrial Clutch Parts Ltd. supplies a complete range of Coremo spring applied hydraulic caliper brakes. The spring-applied brakes can be used as a safety brake or as a holding and parking brake. 

Coremo G2N-ID is a spring-applied negative caliper brake. Best suited for emergency stopping and holding operations in a diverse range of industrial applications.

  • Braking Force: 5,600 N
  • Max. Pressure: 100 bar 
  • Disc Thickness: 25.4 & 40 mm
Out of stock

For further information, please contact us at:

94 100 31

Coremo Hydraulic Failsafe Caliper Brake G2N-ID

Coremo G2N-ID is a spring-applied hydraulic caliper brake, operated by helical springs which generate a constant clamping force. The braking force is generated by springs installed inside the thruster. The levers are produced in SG iron and are certified, tested, and inspected to withstand the pressures produced during dynamic braking. 

The steel thruster withstands pressures over 100 bar. The friction material used for the lining pads has proven to comply with the provisions of European standards on safety and toxic substances.

Product Specific Information

Please enter any product specific information to enable our engineers to specify the correct product or product for you.

Product Brake
Brand Coremo
Actuation Method Hydraulic
Actuation Type Passive
Brake Type Spring Applied
Compares With ICP, Twiflex
Braking Force 11,200 N
Pressure Connection Port 1/4" gas
Friction Material Organic
Max. Continuous Temp Qc: 14 kW
Max. Working Pressure 100 bar
Min. Release Pressure 50 bar
Brake Disc Thickness 25.4 & 40 mm